Replacing a burnt-out light bulb is a simple way to restore proper lighting in your space. Follow these steps to ensure a safe and effective replacement.
Step 1: Initial Diagnosis
- Confirm the bulb is burnt out by testing it in another socket.
- Ensure the light switch is turned on.
Tools You’ll Need:
- Replacement bulb (matching wattage and type)
- Step stool or ladder (if necessary)
Troubleshooting Steps
1. Turn Off Power
- Switch off the light, and if possible, turn off the circuit breaker for added safety.
2. Remove the Old Bulb
- Allow the bulb to cool if it was recently used.
- Carefully unscrew the bulb by turning it counterclockwise.
3. Install the New Bulb
- Screw the new bulb in clockwise until snug.
- Caution: Do not overtighten the bulb.
4. Test the Light
- Turn the light switch back on to check if the new bulb works.
When to Stop & Seek Help
- The new bulb doesn’t light up.
- The light fixture appears damaged.
If the issue persists, please contact Darwin Homes or submit a service request via your Resident Portal.